17/19-INCH VALUE TFT-LCD MONITOR INSTRUCTION MANUAL Please read this manual thoroughly before use, and keep it handy for future refer
C. FRONT KEY CONTROL 1. SOURCE / Select input source, and move the previous menu. 2. MENU Activates and exits the On Screen Display. This butt
OSD MENU DESCRIPTION A: PICTURE MENU (for AV1 & AV2 input) 1) Press the MENU button. 2) Press the up(▲) or down(▼) button to select the PICTURE.
B. SOUND MENU 1) Press the MENU button. 2) Press the up(▲) or down(▼) button to select the SOUND. 1. VOLUME 1) Press the right(▶) or enter button
2. Mute 1) Press the up(▲) or down(▼) button to select the MUTE. 2) Press the left(◀) or right(▶) button to select the ON or OFF.
C. PC MENU(for PC input) 1) Press the MENU button. 2) Press the up(▲) or down(▼) button to select the PC. 1. CONTRAST & BRIGHTNESS 1) Press th
2. H. POSITION, V. POSITION, CLOCK & PHASE 1) Press the up(▲) or down(▼) button to select the PC sub Menu. 2) Press the left(◀) or right(▶) butt
3. COLOR MODE 1) Press the up(▲) or down(▼) button to select the COLOR MODE. 2) Press the right(▶) or enter button. 3-1. AUTO COLOR 1) Press the
3-2. COLOR TEMP 1) Press the up(▲) or down(▼) button to select the COLOR TEMP. 2) Press left(◀) or right(▶) button to select the color temp mode. 3
D. SETUP MENU 1) Press the up(▲) or down(▼) button to select the SETUP. 2) Press the right(▶) or enter button. 1. LANGUAGE 1) Press the left(◀) or
2. H. POSITION, V. POSITION, OSD TIMER, TRANSPARENT(for OSD control) 1) Press the up(▲) or down(▼) button to select the SETUP sub menu. 2) Press the
Using the VESA standard wall mount design and the 100mm hole pattern on the back panel to install the LCD monitor to the wall. Wall-mount Installati
▶ PIN ASSIGNMENTS Pin 1 RED VIDEO 9 2 GREEN VIDEO 10 SIGNAL CABLE DETECT 3 BLUE VIDEO 11 GROUND 4 GROUND 12 SDA(for DDC) 5 GROUND 13 H-SYNC.(or H
This monitor features a power management system to “power down” upon receipt of the VESA DPMS(The display power management signaling) from a VESA DPM
17’’ 19’’ LCD-Type 17˝ Diagonal AM-TFT(Active-Matrix) 19˝ Diagonal AM-TFT(Active-Matrix) Pixel pitch(mm) : 0.264(H) x 0.264(V) Pixel pitch(mm) : 0.2
WEEE Symbols 22 ……………………………………………………………………. INSTRUCTION MANUAL Correct Disposal of This Product (Waste Electrical & Electronic Equipment
MEMO
MEMO
P/N : L39ME0168 Rev.6
SAFETY INSTRUCTION ………………………………………………………………….. 2 ~ 3 CAUTIONS ………………………………………………………………... 4 FCC RF INTERFERENCE STATEMENT …
Important Safety Instruction 1. Read these instructions. 2. Keep these Instructions. 3. Heed all warnings. 4. Follow all instructions. 5. D
- The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed no the appara
CAUTION The power supply cord is used as the main disconnect device, ensure that the socket-outlet is located/installed near the equipment and is eas
NOTE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These lim
A. BOTTOM PANEL CONTROL 1. DC 12V IN 2. D-SUB IN PC Signal Input 3. VIDEO 1(AV1) IN Composite signal Input for AV1 4. VIDEO 1(AV1) OUT Video loo
B. REMOTE CONTROLLER (Option) 1. POWER( ) Turns the power ON or OFF. There will be a few seconds delay before the display appears. 2. SOURCE Select
Comentários a estes Manuais